|
|
Build Your Online Product Catalogs?
| Product Name: |
Power Pallet Truck CANBUS handle
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
CANBUS handle |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
The benefits from noblelift canbus tiller handle
By using the most modern hall-sensors,common wearing parts such as potentiometers are replaced by contant less control parts.there is further improvement for the hall sensor technology on the PCB of noblelift handle:the normal constructer is touse a microswitch could have mechanical abrasion that leads to the zero point excursion after long period of time
The advanced CAN-bus framework design with the following advantages:
All the signals output from the PCB are digital;co***red with the normal analog signal,the digital signal is much more reliable,and with strong anti-disturbance capability of the PCB also in creases much.
CAN-Bus interface significantly decreases the number of the wiring,which leads to reduce the fault rate of the truck;thus the reliability of the truck increases much.
With CAN-Bus framework,it is wasy to check and eliminate the fault by connecting an external equipment,for example,a laptop computer.
With CAN-Bus framework,it is convenient to integrate different CAN protocol for different speed controllers in the CPU of the PCB;the handle can match with different speed controllers by some simple settings for the handle.Therefore,when the truck changes to another type of the controller, the PCB is the same version and not necessary to change the handle¡¯s PCB.
By special sealing process aprotection is guaranteed to IP53.Rain doesn¡¯t endanger the working realiability.
The handle uses rocker switches for the lift/lower function.Co***red with the normal switches,the rocker switch has the following advantages:
Constructer is much simple.to realiza the lift/lower function,normally it needs two separate standard switches;while the rocker switch integrates the lift/lower function in only one button.
The rocker switch is much more stable,and service is simple.the normal switch consists of 6pcs of parts,then one set of switches consist of 12pcs of parts;however a rocker switch for lift/lower only consists of 4pcs of parts.T |
| Company: |
Shanghai Noblelift Co.Ltd Guangzhou Branch
|
| Contact: |
Mr. liu fuqing |
| Address: |
NO1137 Whampoa East Road,Guangzhou |
| Postcode: |
|
| Tel: |
020-82180578 |
| Fax: |
020-32012975 |
| E-mail: |
|
|
|
|
Home
